NetAlly LinkRunner AT 3000 Netværkstester Kobber Fiber
NetAlly LinkRunner AT 3000 - Netværkstester
NetAlly LinkRunner AT 3000 er en robust netværkstester, der er designet til at opfylde kravene fra moderne netværksfolk. Den tilbyder en omfattende pakke af testfunktioner, herunder PoE-, UPoE-, netværksforbindelses-, ping- og wiremap-tests, hvilket gør den til et vigtigt værktøj til fejlfinding og vedligeholdelse af netværksinfrastruktur. Med sine avancerede tilslutningsmuligheder, herunder USB Type-C-, RJ-45-, SFP- og USB Type-A-porte, sikrer enheden kompatibilitet med en bred vifte af netværksmiljøer. Den 5-tommer store farveberøringsskærm giver en intuitiv brugergrænseflade, mens den indbyggede 8 GB flash giver rigelig lagerplads til testresultater og konfigurationer. NetAlly LinkRunner AT 3000 er designet til at modstå barske driftsforhold og overholder MIL-PRF-28800F: Klasse 3-standarder for stød- og vibrationstolerance, hvilket sikrer holdbarhed og pålidelighed. Uanset om det er i marken eller i laboratoriet, er denne netværkstester et uvurderligt aktiv for netværksteknikere og ingeniører, der ønsker at optimere og fejlfinde deres netværksinfrastruktur.
-
Product no 1002247381
Model LINKSOLUTIONS-KT-3K
Brand NetAlly
Weight 0.48 kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Produktbeskrivelse | NetAlly LinkRunner AT 3000 - netværkstester |
| Enhedstype | Netværkstester |
| Tests, værktøjer og mål | PoE, ping, wiremap, netværksforbindelse, UPoE |
| Funktioner | Status LED, VLAN support, USB-forbindelse, netværkskonfiguration med DHCP, TruePower PoE, indbygget 8 GB flash, 802.1x autentificering, Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP) |
| Skærm | 5" |
| Kraft | 100-240 V |
| Dimensioner (B x D x H) | 10.2 cm x 4.2 cm x 19.6 cm |
| Vægt | 480 g |
Avancerede tilslutningsmuligheder
NetAlly LinkRunner AT 3000 er udstyret med en række forskellige stik, herunder 24-pin USB Type-C, RJ-45, SFP og USB Type-A, og sikrer alsidige tilslutningsmuligheder til en lang række netværksmiljøer.
Omfattende testfunktioner
Fra PoE, UPoE og netværkstilslutning til ping- og wiremap-tests tilbyder denne enhed en omfattende pakke af tests, værktøjer og målinger til nøjagtig vurdering og fejlfinding af netværksproblemer.
Holdbart design
NetAlly LinkRunner AT 3000 er designet til at modstå barske forhold og opfylder MIL-PRF-28800F: Klasse 3-standarder for stød- og vibrationstolerance, hvilket sikrer pålidelighed i udfordrende miljøer.
Intuitiv betjening
Enheden har en 5-tommers farveberøringsskærm med en opløsning på 720 x 1280 pixel og en intuitiv grænseflade, der gør det nemt at betjene den og vise klare resultater.
Effektiv strømstyring
Enheden drives af et litium-ion-batteri med en spænding på 3,63 V og understøttes af et indgangsspændingsområde på 100-240 V, hvilket sikrer effektiv strømstyring og drift.
.jpg)
LinkRunner At 3000 Overview
The LinkRunner AT 3000 is designed for frontline technicians who need fast and comprehensive validation of copper and fiber network links with powerful network connectivity troubleshooting. While offering the same core functions of its predecessors (LinkRunner AT 1000 and 2000 models), the LinkRunner AT 3000 features a large touchscreen and in-depth AutoTest that provides deeper network visibility..jpg)
Next Generation Copper and Fiber Ethernet AutoTester
Comprehensive AutoTest validates and troubleshoots all aspects of network link connectivity and services
AutoTest and Profiles – Comprehensive network link test validates all aspects of network connectivity
AutoTest is the most comprehensive testing application on the LinkRunner AT 3000. The app is fully customizable with savable test profiles and reusable Test Targets. Multiple profiles can be grouped allowing a single button press to validate connectivity on all VLANs. AutoTest results are automatically uploaded to the Link-Live platform after you claim your LinkRunner AT 3000.Switch Test – Identifies the nearest connected switch and critical configuration information
The Switch test provides a graphical representation of the immediate connection. The LinkRunner AT 3000 uses the IEEE Link Layer Discovery Protocol (LLDP), plus the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the nearest switch name, chassis, model, slot, and port. Plus, displays other critical information like switch MAC/IP address, connected VLAN and VLANs supported, link speed and duplex (can identify advertised link speeds up to 10G), connection (MDI or MDI/X), and PoE voltage/power (actual and under TruePower load).Cable Test – Validate cabling for proper termination, test for length, common miswires, and distance to fault
Cable Test – Validate cabling for proper termination, test for length,common miswires, and distance to faultThe LinkRunner AT 3000’s Cable Test can help you determine cable length and fault status, verify wire mapping of patch cords and structured cabling, and locate cables using toning or WireView office locators. Test structured cabling using the top RJ-45 port. Test patch cables with the built in second RJ-45 for complete pin to pin mapping and TDR.Ping/TCP Test – Verify connectivity to on or off-network devices, ensure TCP port availability
The Ping/TCP test app runs a Ping or TCP Connect test to your chosen target, allowing you to verify connectivity and identify intermittent issues.A Ping test sends an ICMP echo request to the selected target to determine whether can be reached and how long it takes to respond. Test for MTU issues using the frame size and do not fragment settings. The results are trended, displaying the last 24 hours as well as loss statistics. A TCP Connect test opens a TCP connection with the selected target to test for port availability using a 3-way handshake (SYN, SYN/ACK, ACK). You can open the TCP/Ping app from the Home screen, or you can select Ping or TCP Connect from another app, such as AutoTest, while viewing a device’s details.
Link-Live™ Collaboration, Reporting, and Analysis Platform
Link-Live acts as a central system for managing test results and devices. It streamlines workflows by allowing easy logging, documenting, and reporting of test activities. When your tester is connected to Link-Live, test results are automatically uploaded to the dashboard for project management and reporting. In the case of no internet connectivity (air-gapped networks or new construction) results are buffered infinitely until connectivity is establishedYou can also upload additional files, screenshots, images, profiles, location information, and comments whenever needed. Moreover, LinkRunner AT 3000 testers with AllyCare Premium Support can receive firmware updates directly from Link-Live.Reflector – Works with other NetAlly tools for network performance testing
The LinkRunner AT 3000 offers a packet reflector mode, which enables you to conduct endto-end network performance tests when used with other NetAlly tools (LinkRunner 10G, EtherScope® nXG, CyberScope® CE). This mode validates network throughput capabilities up to 1Gbps. The reflector also works for 1G LANBERT™ media qualification testing. The line rate reflector supports control of what types of packets to reflect as well as swapping of source and destination MAC and IP addresses for L3 performance testing.Additional Tools and Diagnostics – App Store
After registering the tester, users can download apps from the Link-Live app store to accomplish many tasks in addition to testing. Using third-party apps and USB or BT/BLE accessories allows the user to:3d / Augmented Reality
.jpg)
1:28.jpg)
1:36