HPE Aruba CX 10000-48Y6C Switch 48-porte 25 Gigabit Ethernet
HPE Aruba CX 10000-48Y6C - Switch - L3 - Administreret - 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 - ryg til front-luftstrøm - monterbar på stativ
509 969,00 DKK
407 975,20 DKK excl. VAT
-
Product no 1001372319
Model R8P14A#ABB
Brand Hewlett Packard Ente
EAN 0190017539805
Weight 9.75 kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Produktbeskrivelse | HPE Aruba CX 10000-48Y6C - switch - 48 porte - Administreret - monterbar på stativ |
| Enhedstype | Switch - 48 porte - L3 - Administreret |
| Pakningstype | Ryg til front-luftstrøm monterbar på stativ 1U |
| Undertype | 25 Gigabit Ethernet |
| Porte | 48 x 1/10/25 Gigabit Ethernet SFP / SFP+ / SFP28 + 6 x 40/100 Gigabit QSFP+ / QSFP28 |
| Præstation | Omkoblingskapacitet: 3,6 Tbps<br>Forsinkelse: < 1.30 µs |
| Kapacitet | IPv4 værter: 120000<br>IPv6 værter: 52000<br>IPv4 unicast direkte ruter: 131072<br>IPv6 unicast direkte ruter: 32732<br>IGMP-grupper: 4094<br>MLD-grupper: 4094<br>IPv4 ruter (Multicast): 4094<br>IPv6 ruter (Multicast): 4094 |
| MAC adresse table størrelse | 98K indtastningshukommelse |
| Routingprotokol | OSPF, BGP-4, RIP-2, GRE, OSPFv3, Multiprotocol BGP, statisk IPv4 routing, statisk IPv6 routing, ECMP, police-baseret routing (PBR), RIPng |
| Protokol til fjernadministration | SNMP, CLI |
| Egenskaber | REST API interface |
| Effekt | AC 100-240 V (50 - 60 Hz) |
| Dimensioner (B x D x H) | 43.82 cm x 51.1 cm x 4.44 cm |
| Vægt | 9.75 kg |
| Lokalisering | Engelsk / Europa |
| Producentgaranti | 1 års garanti |
HPE Aruba Networking CX 10000-48Y6C Distributed Services Back-to-Front 6 Fans 2 PSU Switch Bdl
HPE Aruba Networking CX 10000 Switch Series, industry's first DPU-enabled switches, delivers a flexible and innovative approach to address the security performance, agility, and scalability demands of both traditional enterprise data centers and emerging distributed, edge and co-located centers of data. The switch series is a category of switches that combines the best-of-breed network operating system, HPE Aruba Networking CX Switch Operating System (AOS-CX), for data center, campus, and edge in addition to the fully programmable DPUs. This allows the switches to deliver software-defined services inline, at scale, with wire-rate performance and orders of magnitude scale and performance improvements over traditional L2/L3 switches at a fraction of their TCO. This allows the flexibility to enable service delivery, when deployed as access, leaf top-of-rack (ToR), or end-of-row (EoR) in a data center, and potentially in the aggregation layer in campus or edge data center designs.
A category of distributed services switch with embedded programmable DPUs overcoming legacy network and security design limitations
CX 10000 offer 3.2 Tbps of switching capacity supporting 1/10/25GbE CX 10040 offer 8 Tbps of switching capacity supporting 32 x 100G, 6 x 400G connectivity
Unified network and security policy through HPE Aruba Networking Fabric Composer
Security ecosystem integration with third-party vendors
Leverage existing AOS-CX cloud-native switching
Distributed stateful segmentation, east–west firewalling, NAT, encryption, and telemetry services — all delivered inline
Improves network bandwidth and performance
- The HPE Aruba Networking CX 10000 Switch Series offers a unique blend of performance and scale for distributing advanced networking and security services where it is impractical and costly to force traffic back and forth across the network to a centralized policy enforcement point.
- Simplify application of services at the services network access layer edge.
- All switching and routing are wire-speed to meet the demands of bandwidth-intensive applications today and in the future. CX 10000 models provide 3.2 Tbps for bidirectional switching and 2000 Mpps for forwarding. CX 10040 models offer 8 Tbps of switching capacity, 1.6 Tbps of L4 stateful inspection.
Limit security appliance sprawl and cost
- The CX 10000 series improves network bandwidth and performance by not having to trombone local traffic to a centralized chokepoint, helping to improve security posture while limiting appliance sprawl complexity and cost.
- The CX 10000 series provides a compelling architectural alternative that distributes these advanced services to the data center edge, with unified network and security automation and policy management.
Extend zero trust and microsegmentation
- The HPE Aruba Networking CX 10000 Switch Series allows operators to extend industry-standard leaf-spine networking with 1.6T of distributed micro-segmentation, east-west firewalling, NAT, encryption and telemetry services delivered inline across every port closer to critical enterprise applications.
- Organizations with dedicated SecOps teams can leverage Pensando® policy and services manager (PSM) based on specific security roles and responsibilities for increased scalability and fault tolerance.
- Extends zero trust segmentation deeper into the data center for any type of host.
- Optimizes network traffic flows, bandwidth, and performance, which reduces operational complexity associated with service switching.
- The switch series allow operators to extend industry-standard leaf-spine networking with distributed stateful segmentation, east–west firewalling, NAT, encryption, and telemetry services — all delivered inline, all the time, on every access port, closer to where critical enterprise applications run.
Simplify operations
- The CX 10000 series is integrated with HPE Aruba Networking Fabric Composer which provides unified network and security management, automated switch and network configurations, and unified security policy and distributed firewalls across the entire switching fabric.
- The CX 10000 series integrates through Rest API, provides flow data to security and network performance tools including Advanced Security ML (XDR), Application Dependency Mapping (ADM), Network Performance Management (NPM), SIEM/SOAR, firewall compliance rules, and identity group mapping tools.
- The switch series is based on the HPE Aruba Networking CX Operating System(AOS-CX), a modern, database-driven operating system that automates and simplifies many critical and complex network tasks.
Specifications
| TechnicalSpecifications | |
|---|---|
| Ports | 48 x 25GbE SFP+, 6 x 100Gb QSFP |
| Memory and processor | CPU: Intel® Xeon® D-1637 6-core processor at 2.90 GHz Switch memory, drive and flash: 32 GB RAM, 64 GB SSD |
| Latency | <1 µs (without redirect) <5 µs (with redirect) |
| Throughput | 2000 Mpps |
| Switching capacity | 3.2 Tbps (6.4Tbps full-duplex) |
| Stacking capabilities | Yes |
| Management features | CLI REST API SNMP HPE Aruba Networking Fabric Composer HPE Aruba Networking Switch Multi-Edit Software HPE Aruba Networking Central RJ-45 serial port AMD® Pensando® PSM Micro USB console |
| Power supply | Field-replaceable, hot-swappable, and up to two power supplies |
| Input voltage | 100–240 VAC |
| Power consumption | Maximum: 753W Idle: 400W |
