Anycubic AHPEGE-102 PETG Filament 1.75mm 1kg Grå
Anycubic AHPEGE-102 PETG - grå - 1 kg - PETG filament
77,00 DKK
61,60 DKK excl. VAT
-
Product no 1004284095
Model AHPEGE-102
Brand ANYCUBIC
Weight kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Materiale | PETG |
| Vægt | 1 kg |
| Farve | Grey |
| Dry Out Before Use | Required |
| Drying Condition | 55-65 °C, 6-8 h |
| ACE Compatibility | Compatible |
| Nozzle Size | Recommended 0.2 mm or above |
| Printing Temperature | 230-250 ℃ |
| Heated Bed Temperature | 60-70 ℃ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Density | 1.23 g/cm³ |
| Melt Index | 25±3 g/10 min (250℃/2.16kg) |
| Melting Point Temperature | 130 ℃ |
| Vicat Softening Temperature | 72 ℃ |
| Heat Deflection Temperature (0.45MPa) | 69 ℃ |
| Young's Modulus | 1850±100 Mpa |
| Tensile Strength | 52±1 Mpa |
| Elongation at Break | 13±1% |
| Bending Modulus | 2000±50 Mpa |
| Bending Strength | 80±2 MPa |
| lzod lmpact Strength (X-Y) | 22±2 kJ/m² |
| Tensile Strength (Z) | 45±1 MPa |